LAKEFRONT ENTERPRISES, INC. ---Hydrowrap

LAKEFRONT

ENTERPRISES, INC.

HOME
ENVIRO - BOND^™
ENVIRO - BOND^™ FAQ^.
VIDEO^.
BILGE SOCKS^.
SAFETY SEAL^.
DRAIN PROTECTOR^®
HYDROWRAP^®
PRODUCTS^.
DOCUMENTS^.
ORDER ^.
E-MAIL ^.

BUZZARDS BAY
REPORT ON
BILGE SOCKS

MASSACHUSETTS
COASTAL ZONE
MANAGEMENT
BILGE SOCK LETTER

CHEMICAL
COMPATIBILITY
TEST

LAKEFRONT ENTERPRISES, INC.

Hydrowrap

HYDROWRAP^™offers an economical, permanent, high strength and easy to use structural repair alternative to welding, sleeving and other traditional methods for any facility with fluid-bearing lines or vessels.

Refineries/Pipelines
Foundries
Cement Plants
Chemical Plants
Paper Manufacturers
Port Facilities
Utilities
Water Treatment Plants
Waste Recovery Industry
Sewage Lines
Manufacturers
Electronics Industry
Agricultural Industry
Mining Industry
Contractors
HVAC
Ships/Boats
Pools/Spas
Do-it-Yourself

Pipe Repair
Pipe Reinforcement
Sealing Joints
Duct Sealing
Abrasion Protection
Corrosion Protection
Structural Repair
Dielectric Protection
Electrical Insulation
Underwater Repair

Ferrous &
Non-Ferrous Metals
PVC/Plastics
Fiberglass
Cement
Rubber
Wood
And many more...

1. Need repair? Quick!
No mixing!
No measuring!
No waiting!
No cleanup!
2. Just soak...

1. Roughen area with an abrasive material (sandpaper, etc.)
2. Wipe clean.
3. Put on enclosed gloves and wear safety glasses. 4. Remove wrap.
5. Immerse in water for 20 seconds.

3. Wrap... 4. ...and Set!

6. Wrap damaged area tightly, extending wrap s' (5.1 cm) beyond the damaged area on both sides. 7. Hold tight in place until Hydrowrap^™ sets.

NOM. PIPE SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 22 24

PIPE OD INCHES .84 1.05 1.32 1.9 2.38 3.5 4.5 6.63 8.63 10.75 12.75 14 16 18 20 22 24

CIRCUMFERENCE 2.64 3.3 4.13 6 7.5 11 14 20.8 28.5 35.5 42 46 55.3 62.2 69 72.6 83

NUMBER OF WRAPS TO PLY (ROUNDED TO THE NEAREST WHOLE PLY)

2 in. x 3' 14 11 9 6 5 3

2 in. x 5' 23 18 15 10 8 5 4 3

3 in. x 10' 20 16 10 8 6

3 in. x 30' 48 30 24 18 13 10 9 8 7

4 in. x 15' 24 15 12 9 7 5

4 in. x 30' 48 30 24 18 13 10 9 8 7

4 in. x 50' 40 30 21 17 14 13 11 10 9 8 7

Red type indicates Manufacturer's recommended application. (Minimum 8 plys required)

NOTE: Areas not filled in can be calculated by dividing the tape LENGTH by the CIRCUMFERENCE of the appropriate diameter pipe.

HYDROWRAP^™

Part Number SIZES For Max Pipe Diameter of

HW-0205 2 inches x 5 feet 5.1 cm x 1.5 mtrs 1" Nominal 2.54 cm

HW-0212 2 inches x 12 feet 5.1 cm x 3.65 mtrs 2" Nominal 5.08 cm

HW-0310 3 inches x 10 feet 7.6 cm x 3.04 mtrs 3.5" Nominal 8.89 cm

HW-0330 3 inches x 30 feet 7.6 cm x 9.14 mtrs 12" Nominal 30.48 cm

HW-0415 4 inches x 15 feet 10.2 cm x 4.57 mtrs 6" Nominal 15.24 cm

HW-0430 4 inches x 30 feet 10.2 cm x 9.14 mtrs 12" Nominal 30.48 cm

HW-0450 4 inches x 50 feet 10.2 cm x 15.24 mtrs 20" Nominal 50.8 cm

HW-0615 6 inches X 15 feet 15.2 cm X 4.57 mtrs 9" Nominal 22.86 cm

HW-0630 6 inches X 30 feet 15.2 cm X 9.14 mtrs 18" Nominal 45.72 cm

HW-0660 6 inches X 60 feet 15.2 cm X 18.29 mtrs 36" Nominal 91.44 cm

HW-0690 6 inches X 90 feet 15.2 cm X 27.43 mtrs 45" Nominal 114.3 cm

HW-1030 10 inches X 30 feet 24.4 cm X 9.14 mtrs 30" Nominal 76.2 cm

HW-1060 10 inches X 60 feet 24.4 cm X 18.29 mtrs 60" Nominal 152.4 cm

HW-1090 10 inches X 90 feet 24.4 cm X 27.43 mtrs 90" Nominal 228.6 cm

HW-10120 10 inches X 120 feet 24.4 cm X 36.58 mtrs 120" Nominal 304.8 cm

HW-10150 10 inches X 150 feet 24.4 cm X 45.72 mtrs 150" Nominal 381.0 cm

Technical Specifications

FORM	IMPREGNATED FABRIC
COLOR	WHITE
APPLICATION METHOD	WATER-ACTIVATED WET LAYUP
NUMBER OF PILES REQUIRED	8 MINIMUM
THICKNESS	11 ± 2 MILS
RESIN CONTENT	30 ± 3%
WORKING TIME	60 MINUTES PRIOR TO DIRECT EXPOSURE TO WATER
CURE CYCLE 75°F (24°C)	30 MINUTES AFTER DIRECT EXPOSURE TO WATER
HARDNESS-CURED LAMINATE	85 ± 4 SHORE D
DIELECTRIC STRENGTH	NON-CONDUCTIVE WHEN CURED/16,000 VOLTS
HEAT RESISTANCE (24-HOUR CURE)	400°F MAX (204°C)
MAXIMUM INSTALLATION TEMPERATURE	200°F(93°C)
SIZES	WIDTHS: 2", 3", 4", 6", 10" LENGTH: 5 TO 150 LINEAL FEET
TOXICITY	CONTAINS NO HARMFUL SOLVENTS AND CAN BE USED ON WATER AND FOOD SERVICE LINES
DOT-NON-HAZARDOUS	FREIGHT CLASS NOI - ITEM 4620 SUB 5 CLASS 60
SHELF LIFE	2YEARS

Mechanical Properties

Structure Method PSI/Temp

TENSILE STRENGTH 75°F (24°C) ASTM D 3039 65,000

TENSILE MODULUS 75°F (24°C) ASTM D 638 3.0 x 106

FLEXURAL STRENGTH 75°F (24°C) ASTM D 790 26,300

FLEXURAL MODULUS 75°F (24°C) ASTM D 790 1.65 x 106

COMPRESSION STRENGTH ASTM D 695 25,000

INTERLAMINAR SHEAR @ 75°F (24°C) ASTM D 2344 2900

Tg (GLASS TRANSITION TEMPERATURE) ASTM E 831 252F ( 22')

TEMPERATURE CYCLE TEST 16 LAYERS CYCLED FROM 75°F - 45°F (24°C - 232°C) NO DELAMINATION

CHEMICAL Immersion Test - ASM D 543

Chemical Immersion Period Result

ACETONE 30 DAYS PASS

DIESEL FUEL 30 DAYS PASS

ETHYL ALCOHOL 30 DAYS PASS

GASOLINE 30 DAYS PASS

30% HCL 30 DAYS PASS - SLIGHTLY SOFTENED

TOLUENE 30 DAYS PASS

MEK 30 DAYS PASS

LAKEFRONT ENTERPRISES, INC.
P.O. Box 573, North Hampton, NH 03862
Tel: (603) 964-2740 Fax: (603) 964-2739
E-Mail: berquist@enviro-bond.com
Web: www.enviro-bond.com